Assisting Special Rescue Teams Practice Test

These questions are part of the practice quiz. Start practicing

• Which zone is designated for operations and access control in a technical rescue site?
• Which statement correctly describes the primary risk of liquefied petroleum gas exposure?
• During a rope rescue lowering operation, what is the primary role of the belay system?
• Why is communication discipline critical in rescue teams?
• What is the primary purpose of scene size-up?
• Which method should rescuers use to detect the presence of a dangerous atmosphere?
• Which of the following is an example of a rescue search pattern?
• What is the role of awareness-level rescuers in the assessment of a technical rescue situation?
• Who is typically the responsible party for a technical rescue incident at a worksite or industrial facility?
• What is the purpose of hand signals in rope rescue?
• What does the "I" stand for in the FAILURE acronym
• The maximum slope of a low-angle rescue operation is _____ degrees.
• Which statement best describes the priority during a trench cave-in rescue?
• What is used to stabilize the sides of an excavation?
• Which statement best describes the secondary survey in rescue medicine?
• Which is a valid principle for disentangling a victim from a wrecked automobile?
• Which PPE item is used to protect hands during rope rescue?
• What color is most commonly used for barrier tape to mark the cold zone?
• Who is responsible for securing an industrial facility’s scene during a technical rescue?
• In ICS, who has overall responsibility for incident objectives and strategy?
• What is rapid scene assessment?
• What is the term for soil removed from an excavation?
• What is an after-action report?
• The person primarily responsible for securing an industrial site in a technical rescue scenario is the:
• Why should anchors be redundant and protected against single-point failure?
• What is the purpose of scene size-up and what elements does it include?
• What is a common cause of secondary collapse at a trench rescue incident
• In a technical rescue incident, what is the next step after stabilization has taken place?
• What factor commonly limits helicopter transport for victims in technical rescue operations?
• Which control zone has the largest perimeter?
• What is a fire fighter's initial objective during a confined-space incident
• Which hazardous materials awareness-level skill is essential?
• Which adjunct is used most frequently to stabilize a sitting victim?
• In a technical rescue incident, which control zone is typically used to locate the incident command post?
• What is the main benefit of using a mechanical advantage system in rescue lifting?
• What is a key principle when disentangling a victim from a wrecked automobile?
• An awareness-level technical rescue task would most likely involve which action?
• Which statement best explains why terminology is emphasized during interagency training?
• In a trench rescue, which step comes first?
• Which statement describes a permit-required confined space?
• In rope operations, what is the primary purpose of a tether line?
• In the 10-step sequence, which step is designated as the first step?
• What type of respirator system provides a continuous supply of air from outside the hazard zone?
• Fire fighters trained to the awareness level of technical rescue should know about specialized rescue tools: the names and purposes of the tools.
• During air management for SCBA, what is a critical factor for escape or rehab?
• In rescue operations, which outcome most directly results from disciplined radio communication?
• What is the purpose of stabilizing the vehicle during extrication?
• From a safety standpoint, how far should you park from downed power lines?
• Which term describes the soil material removed during an excavation?
• During water rescue operations, a personal flotation device should be worn by anyone within ________ of the water.
• What knot is commonly used as a progress capture knot in rope systems?
• In rescue lifting, what is mechanical advantage, and why is it used?
• What does PPE decon typically involve in rescue scenarios?
• Which tool is commonly used to locate voids or air pockets in a collapsed structure?
• In technical rescue operations at industrial sites, which resource is most commonly readily accessible to support operations?
• What is PPE decon in rescue personnel?
• In trench rescue operations, what is prioritized before any rescue actions?
• Who is responsible for securing the scene at an industrial facility?
• Which statement about confined spaces is true?
• Which statement best describes the primary purpose of a size-up during the initial response?
• What distinguishes a static rope from a dynamic rope in rescue operations?
• Which statement best defines a confined space?
• Which color is commonly used to designate the cold zone in barrier tape?
• Which factor determines the size of the rescue area?
• Which factor commonly limits the use of helicopters for victim transport?
• In rescue operations, a search pattern is best described as?
• What is the first priority at any rescue incident?
• Name a friction hitch other than Prusik used in rope rescue?
• Which element is NOT typically considered during the initial scene size-up?
• Which hazard materials operations-level skill applies?
• Which statement best describes the primary survey in rescue medicine?
• What is the most effective way to demarcate control zones at an emergency site?
• What is the primary purpose of immobilization in rescue transport?
• What is 'rigging' in rescue?
• What is the area that surrounds the incident site and whose size is proportional to the hazards that exist
• Which scenario requires a backboard versus a scoop stretcher for patient transport?
• What is the primary safety priority during a collapse scene?
• What is a two-person carry and when is it used?
• What is the most common type of rescue situation encountered by firefighters?
• An accountability system should be established for which incidents?
• What is the step in the technical rescue incident process that follows removal of a victim?
• Which PPE items are required for technical rope rescue?
• What is the first level of technical rescue training?
• In which control zone is decontamination performed?
• Which item is NOT listed as required PPE for technical rope rescue?
• In the ICS, who is primarily responsible for monitoring on-scene safety and developing measures to protect responders?
• Which zone is designated for decontamination and support activities in hazardous environment operations?
• Which equipment is noted as being recommended for wilderness operations but not usually required elsewhere?
• In the context of packaging, the primary objective is to?
• Which resource do utility companies have readily accessible that is often needed in technical rescue incidents?
• Which is one of the two greatest hazards at a confined-space incident?
• During an incident, rapid scene assessment is used to identify immediate risks and priorities to guide actions. Which of the following best fits this concept?
• How does exposure to natural gas affect the body?
• Which role handles public information in ICS?
• For awareness-level responders, what is the practical purpose of knowing the names and purposes of specialized rescue tools?
• Which practice supports both navigation and patient care during wilderness rescue rehab?
• Which action is correct to take at a trench cave-in rescue?
• In vehicle extrication, what is window management?
• In the event of a building collapse, what is the primary safety concern to minimize further harm?
• After removing a victim from the danger area, what is the next procedural step?
• What is the function of a scoop stretcher?
• What is the priority for a patient with suspected spinal injury during rescue?
• The minimum slope of a high-angle rescue operation is _____ degrees.
• What is a staging area in rescue operations?
• In rapid vehicle extrication, what is the final goal of immobilization and movement control?
• What is the function of lockout/tagout systems?
• In rope-based search and rescue, which statement best describes the safety role of a tether line?
• Which action in the technical rescue sequence focuses on freeing victims from entrapment?
• When does size-up begin?
• Vehicles and equipment are staged in the __________ zone.
• In the FAILURE acronym, the letter L stands for which issue?
• Where are vehicles and equipment staged during an incident?
• Which is one of the five guidelines that firefighters should keep in mind when assisting rescue team members?
• For wilderness operations, what item is specifically noted as recommended though not usually needed for other rescues?
• In which step of the technical rescue incident process are victims freed from entrapment?
• Which NFPA standard covers operations and training for technical search and rescue incidents?
• Which statement best describes the scope of hazardous materials operations-level skills?
• On a technical rescue at a worksite, which person is identified as the responsible party?
• Which scenario is most commonly encountered by firefighters in rescue operations?
• What factor will have the greatest impact on how a technical rescue incident is conducted?
• What does anchor point equalization aim to achieve in a rope rescue setup?
• What is the purpose of an incident action plan?
• What is the first action when responding to an elevator car stalled between floors?
• What is the term for preparing a victim for movement as a unit, often by using a long spine board?
• How many basic steps are there in the multistep special-rescue sequence?
• What is the primary goal of a search in an urban environment?
• In which incidents should an accountability system be established?
• What is the minimum level of rescue training required for direct involvement in rescue operations?
• Why is redundancy in anchors crucial in rope rescue?
• What does the term "packaging" mean in the context of technical rescue
• Define a hot zone and a cold zone in rescue operations.
• What are the primary responsibilities of a Support Technician on a USAR team?
• What is the most common method of demarcating control zones at an incident site?
• What is the primary purpose of atmospheric testing in confined spaces?
• What should be immobilized first in a patient with suspected spinal injury during rescue?
• During a technical rescue incident, what action is performed immediately after the scene is stabilized?
• In hazardous environment control, what is the difference between a hot zone and a warm zone?
• Which respirator type is described as having an air supply from outside the hazard zone rather than from the user's own tank?
• In triage, what criteria indicate immediate life-saving interventions are needed?
• What is deconfliction in a rescue scene?
• What is the term for the area in which rescue operations are conducted?
• Name three roles typically found in the ICS Command Staff.
• In a wilderness rescue, what is essential for navigation and patient care?
• What is the primary use of a scoop stretcher in patient transport?
• Which of the following is an awareness-level technical rescue skill?
• What should be a basic point of emphasis when training with other departments for technical rescue incidents?
• During structural collapse operations, what is the purpose of shoring?
• Which control zone contains the command post?
• In hazardous materials rescue, what is an Exclusion Zone?
• In water rescue, what is the primary function of a throw bag?
• Which technique or equipment is used to stabilize the sides of an excavation?
• Which piece of equipment is specifically recommended for wilderness operations but not typically required in other technical rescues?
• Where is the power supply control for an escalator usually located?
• In confined spaces, what defines a permit-required confined space?
• In a multi-agency technical rescue, what is the primary purpose of size-up?
• In the FAILURE acronym, what does the "L" stand for?
• What triage system is used for mass casualty incidents to rapidly categorize patients?
• What is the function of ventilation in a confined space rescue?
• What is dynamic load testing and when is it used?
• What color is most commonly used to mark the warm zone with barrier tape?
• On a technical rescue incident, the first-arriving __________ assumes command.
• In guiding a static rope descent, what is the key factor to control speed?
• What is the difference between primary and secondary surveys in rescue medicine?
• When should emergency medical care be started for trapped victims in a technical rescue incident?
• What is the only circumstance in which a victim should be moved prior to completion of initial care, assessment, stabilization, and treatment?
• Which color of barrier tape is used to demarcate the hot zone at a technical rescue incident?
• Who typically assumes command on a technical rescue incident upon arrival?
• Which ICS role is typically responsible for coordinating with other agencies and organizations?
• In a technical rescue incident, if you are given an assignment you do not fully understand, what should you do?
• In a water rescue hazard zone, which item of PPE is mandatory for rescuers?
• In rescue operations, what is Crew Resource Management (CRM) and why is it important?
• How does exposure to liquefied petroleum gas affect the body?
• What is thermal layering and why is it important in rescue?
• What is the procedure for rapid extrication with immobilization in a vehicle crash rescue?
• During the initial scene size-up, which statement best describes the action to take?
• Which statement best describes the purpose of lockout/tagout systems?
• What is the minimum level of technical rescue training that qualifies firefighters to work in the warm zone?
• At the hazardous materials awareness level, which action best protects the public at the scene?
• In establishing site control at an industrial facility during a rescue, which role is primarily tasked with securing the area?